Table of Contents
Advertisement
S
S
UPER
ERVER 5015A-L/5015A-H User's Manual
B-2 Installing Windows XP/2003 for RAID Systems
1.
Insert Microsoft's Windows XP/2003 Setup CD in the CD Driver, and the
system will start booting up from CD.
2.
Press the <F6> key when the message-" Press F6 if you need to install a
third party SCSI or RAID driver" displays.
3.
When the Windows XP/2003 Setup screen appears, press "S" to specify ad-
ditional device(s).
4.
Insert the driver diskette-"Intel AA RAID XP/2003 Driver for ICH7R" into Drive
A: and press the <Enter> key.
5.
Choose the Intel(R) ICH7R
the XP/2003 Setup Screen, and press the <Enter> key.
6.
Press the <Enter> key to continue the installation process. (If you need to
specify any additional devices to be installed, do it at this time.) Once all
devices are specifi ed, press the <Enter> key to continue with the installation.
7.
From the Windows XP/2003 Setup screen, press the <Enter> key. The
XP/2003 Setup will automatically load all device fi les and then, continue the
Windows XP/2003 installation.
8.
After the Windows XP/2003 OS Installation is completed, the system will auto-
matically reboot.
SATA RAID Controller from the list indicated in
B-2
Advertisement
Table of Contents
