Table of Contents
Advertisement
S
S
UPER
ERVER 5015A-L/5015A-H User's Manual
1-3
Server Chassis Features
The following is a general outline of the main features of the SC502L-200B 1U mini
rackmount server chassis.
System Power
The SC502L-200B chassis includes a single 200W power supply.
SATA Subsystem
The SC502L-200B chassis was designed to support one 3.5" or two 2.5" internal
SATA drives (not hot-swappable). ATA/100 IDE drives can be alternately sup-
ported.
Note: The operating system you use must have RAID support to enable the hot-
swap capability of the SATA drives (RAID 0, 1, 5 and 10 supported).
Control Panel
The control panel on the SC502L-200B provides important system monitoring and
control information. LEDs indicate power on, network activity, hard disk drive activity
and system overheat. The control panel also includes a main power button and a
system reset button as well as two
Rear I/O Panel
The rear I/O panel on the SC502L-200B provides one COM port, two USB ports,
PS/2 mouse and keyboard ports, a graphics port and two Gb Ethernet ports (one
on the 5015A-L).
Expansions Cards
The SC502L-200B supports the use of one full-height, half length PCI expansion
card.
1-4
Advertisement
Table of Contents
