Table of Contents
Advertisement
5-7
Adding PCI Expansion Cards
The SC502L-200B chassis can accommodate one full-height, half-length PCI
expansion card.
Installing an Expansion Card
1.
After powering down the system, remove the PCI slot shield.
2.
Fully seat the card into the slot, pushing down with your thumbs evenly on
both sides of the card.
3.
Finish by using a screw to secure the top of the card shield to the chassis.
The PCI slot shield protects the motherboard and its components from EMI
and aid in proper ventilation, so make sure it is always in place.
Chapter 5: Advanced Motherboard Setup
5-7
Advertisement
Table of Contents
