Starting The Setup Utility; Main Setup - Supero SUPERSERVER 5015A-L User Manual

S S
UPER ERVER 5015A-L/5015A-H User's Manual

Starting the Setup Utility

Normally, the only visible POST (Power On Self Test) routine is the memory test.
As the memory is being tested, press the <Delete> key to enter the main menu of
the AMI BIOS Setup Utility. From the main menu, you can access the other setup
screens. An AMI BIOS identifi cation string is displayed at the left bottom corner of
the screen, below the copyright message.
Warning!!
to prevent possible boot failure.
7-2

Main Setup

When you fi rst enter the AMI BIOS Setup Utility, you will enter the Main setup screen.
You can always return to the Main setup screen by selecting the Main tab on the
top of the screen. The Main BIOS Setup screen is shown below.
Main Main Advanced Advanced
System Overview System Overview
System Time System Time
System Date System Date
Supermicro X7SLA Supermicro X7SLA
Version Version : XX.XX.XX : XX.XX.XX
Build Date Build Date : XX/XX/XX : XX/XX/XX
ID ID : X7SLA000 : X7SLA000
Processor Processor
Intel(R) Atom (TM) CPU 330 @ 1.60GHz Intel(R) Atom (TM) CPU 330 @ 1.60GHz
Speed Speed : 1600MHz : 1600MHz
Physical Count / Logical Count Physical Count / Logical Count
System Memory System Memory
Available Size Available Size : 2040MB : 2040MB
Populated Size Populated Size : 2040MB : 2040MB
vXX.XX (C) Copyright 1985-2009, American Megatrends, Inc. vXX.XX (C) Copyright 1985-2009, American Megatrends, Inc.
Do not shut down or reset the system while updating BIOS
BIOS SETUP UTILTY BIOS SETUP UTILTY
Security Security Boot Boot
Exit Exit
[HH HH:MM:SS] :MM:SS]
[Tue 04/24/2009] [Tue 04/24/2009]
: 1 : 1
7-2
Use [ENTER], [TAB] Use [ENTER], [TAB]
or [SHIFT-TAB] to or [SHIFT-TAB] to
select a field. select a field.
Use [+] or [-] to Use [+] or [-] to
configure system time. configure system time.
: Move : Move
Enter : Select Enter : Select
+/-/ : Value +/-/ : Value
F10 : Save F10 : Save
ESC : Exit ESC : Exit
F1 : General Help F1 : General Help
F8 : Fail-Safe Defaults F8 : Fail-Safe Defaults
F9 : Optimized Defaults F9 : Optimized Defaults