Security Settings - Supero SUPERSERVER 5015A-L User Manual

S S
UPER ERVER 5015A-L/5015A-H User's Manual
7-4

Security Settings

The AMI BIOS provides a Supervisor and a User password. If you use both pass-
words, the Supervisor password must be set fi rst.
Main Main Advanced Advanced
Security Settings
Supervisor Password : Installed Supervisor Password : Installed
User Password User Password : Installed : Installed
Change Supervisor Password Change Supervisor Password
User Access Level User Access Level
Change User Password Change User Password
Clear User Password Clear User Password
Password Check Password Check
Boot Sector Virus Protection Boot Sector Virus Protection
vXX.XX (C) Copyright 1985-2009, American Megatrends, Inc. vXX.XX (C) Copyright 1985-2009, American Megatrends, Inc.
Change Supervisor Password:
Use this feature to set a supervisor password. It secures the system from unau-
thorized use by restricting access to persons only with the proper supervisor-level
password. Select this feature and press <Enter>, and then type in the Supervisor
Password.
User Access Level
This feature appears when the Supervisor Password is set. Use this to assign an
access level for a user. The options are: No Access, View Only, Limited, and Full
Access.
Change User Password:
Use this feature to set a user password. It secures the system from unauthorized use
by restricting access to persons only with the proper user-level password. Select
this feature and press <Enter>, and then type in the User Password.
Clear User Password
This feature appears when the User Password is set. Select this to clear the User
Password.
BIOS SETUP UTILTY BIOS SETUP UTILTY
Security Security Boot Boot
Exit Exit
[Full Access] [Full Access]
[Setup] [Setup]
[Disabled] [Disabled]
7-16
Install or Change the Install or Change the
password. password.
: Move : Move
Enter : Select Enter : Select
+/-/ : Value +/-/ : Value
F10 : Save F10 : Save
ESC : Exit ESC : Exit
F1 : General Help F1 : General Help
F8 : Fail-Safe Defaults F8 : Fail-Safe Defaults
F9 : Optimized Defaults F9 : Optimized Defaults