Supero SUPERSERVER 5015A-L User Manual page 36

S S
UPER ERVER 5015A-L/5015A-H User's Manual
Position the DIMM
module's bottom key
so it aligns with the
receptive point on the
slot.
Push the Lock/Re-
lease tabs to their
Release positions.
Make sure that the
DIMM module's side
notches align with the
slot's Lock/Release
tabs as it is pressed
in.
Insert the DIMM
module vertically and
press down until the
module snaps into
place.
When the module is
properlly inserted,
the Lock/Release
tabs will automatically
secure the DIMM
module, locking it into
place.
To Remove:
Use your thumbs to
gently push the Lock/
Release tabs near
both ends of the
module. This should
release it from the
slot. Pull the DIMM
module upwards.
Figure 5-3. DIMM Installation
Release
Lock
Release
5-6
Notches
Lock/Release Tabs
Press Down
Release
Lock
Release