Table of Contents
Advertisement
6-3
System Fans
The SC502L is a fan-less chassis, which results in extremely quiet and energy-
effi cient operation. The only fan in the system is located on the heatsink for the
embedded processor.
6-4
Drive Bay Installation/Removal
Installling a 3.5" SATA Drive (Figure 6-3)
1.
Power down the system and unplug the AC power cord.
2.
Remove the chassis cover as described on page 2-6.
3.
Use screws to secure the drive directly into the left side of the chassis as
shown in the fi gure.
Installling 2.5" SATA Drives (Figure 6-4)
1.
Power down the system and unplug the AC power cord.
2.
Remove the chassis cover as described on page 2-6.
3.
Use screws to secure the drive into the hard drive bracket:
For two drives the bracket is p/n MCP-220-00044-0N.
For one drive the bracket is p/n MCP-220-00051-0N.
4.
Use screws to secure the bracket/drive assembly into the left side of the
chassis as shown in the fi gure.
Chapter 6: Advanced Chassis Setup
6-3
Advertisement
Table of Contents
