Call Register
"Ask for updating firmware only": asks, if you are really sure to update
the firmware.
"Ask for updating bootloader only": asks, if you are really sure to update
the bootloader.
"Never Update, Load settings only": loads settings only from settings
server.
Setting URL
Set up the URL of the settings server from where you would like to
obtain the configuration data to configure your phone. Please read our
whitepaper regarding "Mass deployment" which is available on our
website.
Subscribe Config
The phone can subscribe to setting changes delivered via SIP, in case
this option is switched to "on".
VLAN
Id and Priority
Enter your VLAN ID (0..4095) and Priority (0..7) separated by a space
(e.g., "128 5"). The first number specifies the VLAN number the phone
should be joining and the second number gives the priority of this
device.
Be aware that the whole phone resides in the specified VLAN and that it
can only be assigned to one VLAN at a time.
DEBUG
Syslog Server
Specify here the host at which a Syslog Server is running to store the
log messages coming from the phone.
LCServer
Specify the IP address of the remote LCServer if you want your phone
to connect to it. Usually, you would not need to set the LCServer
setting. It is for company internal development only.
82