Park Orbit; Voice Recorder; Shared Line; Dtmf - Snom 360 Manual

Basic Functions

Park orbit

snom4s (snoms iPBX solution) provides its customers with the
opportunity to set up parking orbits on the media server, where calls
can be parked and picked up. The option 'Park Orbit' enables the phone
to provide this feature. Suppose key P4 is bound to
orbit1@my.proxy.com. The LED on this key now displays the status of
calls, if any, parked on this orbit. A blinking LED indicates that a call is
parked there; the user can pick up this call by pressing P4. Pressing P4
during a call will park it at orbit1@my.proxy.com until the same or
another user picks it up later. The caller will hear the holding music.
This feature is useful for call center environments and all places where
there is a great inflow of calls and some kind of queuing is required to
manage them.

Voice recorder

This option can be set up with a valid voice recording account. Suppose
that vr@my.proxy.com offers voice recording and is bound to key P5 on
the phone. Its usage is as follows:
During a call, the user is able to record his conversation with the other
party by pressing P5. Pressing button P5 again will end the recording
process.
The recorded media can later be listened to by accessing the recorder
account vr@my.proxy.com.
This feature is also useful for recording short messages or memos to
self. By pressing P5 in the idle state a user can record an important
message to be listened to later.
The same applies to the recording of a debate or discussion, to keep
audio minutes of a meeting, or to record an important conference call
hosted on the phone.

Shared Line

snom360 offers the users to share a single registration among multiple
phones. This can be the case for a single outgoing identity for a SOHO
environment using an ISDN/PSTN connection to the outside world, or to
share a single line amongst multiple users in a localized office
environment. In each case, all the phones sharing the same line will
register each line independently and then have the option to map that
particular SIP line as a 'Shared Line' on their programmable keys. The
status of the led will reflect the status of the particular line and users
can easily pick up calls on the same line that have been put on hold by
their colleagues. Regular users of remote pickup will find this feature
really helpful. (See also our whitepaper "Key System Setup"!)

DTMF

This option allows to specify arbitrary key sequences which will be send
via DTMF in case this button has been pressed.
34