Transfer; Direct Transfer; Consultation Transfer - Snom 360 Manual

Advanced Functions

Transfer

Direct Transfer

During a call press the transfer key
party on hold, then dial the number the call is to be directly transferred
to.
As soon as you press
that number.
Key mapping:

Consultation Transfer

During a call in progress, put the connected party on hold by pressing
the hold key
While the call is on hold, you can establish a second call by dialling the
desired number and pressing
you can consult the second party, e.g., to announce the call. You can
connect the two parties by pressing the transfer key
hook on the handset. This behavior is available only if the option "Call
join on Xfer" on the "advanced" web page is enabled. If this option is
disabled, you have to select the party you want the call to be
transferred to via
, the snom 360 will transfer the held party to
Moves the cursor to the left.
/
Moves the cursor to the right.
/
Deletes the character to the left of the
cursor.
Changes input mode to capital letters.
Changes input mode to small letters.
Changes input mode to numbers.
The snom 360 transfers the call.
Aborts the transfer.
, , or
/
, !
/
.
. When the second call is established,
or / , followed by the transfer key
to put the connected
, or the
39