User/Administrator Mode; Software Update; Net Info; Mem Info - Snom 360 Manual

Advanced Functions
The maintenance menu has the following options:

User/Administrator Mode

Via this option you can change to User or Admin mode, respectively.
The default setting for the Admin password is "0000". In User mode a
few settings are not accessible to the phone user.

Software Update

This option is only available when a firmware update is available. It is
indicated by an "SW" in the bottom line of the idle screen. See section
"conducting a software update", below.

Net Info

This option displays live the number of IP packets being sent and
received via the phone.

Mem Info

Here the amount of total and free memory space of the phone is
displayed.

Reboot

If you want to reboot your phone use this option.

Reset Values

If you want to set your phone back to factory settings, type in the
default Admin password which is "0000". It is highly recommended that
you reboot your phone after a reset!

Conducting a Software Update

If your provider is offering a new software version for your phone, an
"SW" is displayed in the left lower corner of the idle screen.
When this is the ase, an additional entry "SW Update" can be found in
the maintenance menu
Moves the selection up.
/
Enters the submenu.
/
Returns to the previous menu
/
structure.
.
45