Snom 360 Manual
  1. Manuals
  2. Brands
  3. Snom Manuals
  4. IP Phone
  5. 360
  6. Manual
Snom 360 Manual

Snom 360 Manual

Voip business phone
Hide thumbs Also See for 360:
Table of Contents

Advertisement

Quick Links

Download this manual See also: Configuration Manual, User Manual
snom 360
VoIP Business Phone
© 2005 snom technology AG
All rights reserved.
Version 1.00
Manual
www.snom.com

Advertisement

Table of Contents
loading

Related Manuals for Snom 360

Summary of Contents for Snom 360

  • Page 1 360 Manual VoIP Business Phone © 2005 snom technology AG All rights reserved. Version 1.00 www.snom.com...
  • Page 2 Version 1.00/20.05.05 Copyright © 2005 snom technology AG. All rights reserved. snom® is registered trademark of snom technology AG and affi liates in Germany, U.S.A. and certain other countries. Other trademarks or registered trademarks mentioned in this document are the property of their respective manufacturers or owners.

  • Page 3: Foreword

    100 years, a form of communication has evolved which we feel cannot be ignored. In spite of the new technology base of the snom 360, most of its look and feel will be very familiar to you and you should be able to use it intuitively.

  • Page 4: Note To The Reader

    S E R A N U A L Note to the reader This manual describes the snom 360 running in administrator mode. The phone supports SIP protocol only! The default password to reach administrator mode is “0000” (four zeros). The current version of this manual can be obtained from: http://www.snom.com...

  • Page 5: Table Of Contents

    Logging on the fi rst account Logon ...............25 Mobility ................... 25 Logon wizard ................25 Identity Handling ..............26 ....................................Outgoing Identity ...................................... Reregister User .......................................... Edit User ........................................Logoff user ......................................... Logoff All Challenge/Authentication ............28 Basic Functions ............31 snom technology AG • 5...
  • Page 6 3 6 0 U V 1 . 0 0 ] S N O M S E R A N U A L Idle state ................. 31 Dialing ................... 31 ....................................... Input Modes ................................. Dialing a phone number ..................................Dialing a SIP address ..................................
  • Page 7 Setup Preferences ....................................Setup Speed Dial ..................................... Setup Lines 1-7 ......................................... Action URLs ....................................Setup Advanced ..........................................Network ..............................Setup Trusted Certifi cates ................................Setup Software Update ..........................................Status Appendix ..............111 Standard Conformance .............111 Index ..............113 snom technology AG • 7...
  • Page 8 3 6 0 U V 1 . 0 0 ] S N O M S E R A N U A L 8 • Table of Contents...

  • Page 9: Installation

    The power supply Safety Information Please read the following safety notices before installing or using your snom phone. They are crucial for the safe and reliable operation of the device.Power supply Power supply You have two options for providing the snom 360 with power: - An external power supply (5 V) - Power feeding over the network cable (IEEE 802.3af...

  • Page 10: Setting Up The Phone

    Fig. 2 Wall Mounting It is also possible to mount the snom 360 on the wall. In order to do this, detach the footstand from the bottom shell and attach it in the appropriate position for wall mounting, as described in steps 1 through 6, below.
  • Page 11 Tilt the footstand forward and downward until the snap-fi ts snap into place in the mounting holes. Please make sure that the four snap-fi ts have securely snapped into the holes before mounting the phone on the wall. snom technology AG • 11...
  • Page 12 3 6 0 U V 1 . 0 0 ] S N O M S E R A N U A L Fig. 5 Fig. 6 (6) The slots on the footstand for the various cords can also be used when the phone is mounted on a wall. After connecting the phone (see chapter Setting up the Phone, above), form the cords into loops and gently press the long ends into the slots on the footstand (Fig.
  • Page 13 Fig. 8 Adjusting the Position of the Display The position of the snom 360’s display is adjustable up to an angle of 45° (Figs. 9 and 10). Hold down the phone with one hand and adjust the display with your other hand.

  • Page 14: Cleaning

    S N O M S E R A N U A L Cleaning To clean the snom 360, use an anti-static cloth. Please avoid cleaning liquids as they might damage the surface or the internal electronics of the phone. Connecting the phone First connect one end of the handset cable to the handset and then to the jack labeled “...
  • Page 15 Their current mapping is depicted with symbols in the bottom line on the display. The twelve keys on the right with LEDs next to them are the programmable function keys onto which different functionalities can be mapped. snom technology AG • 15...
  • Page 16 3 6 0 U V 1 . 0 0 ] S N O M S E R A N U A L The keys of the numeric block in different operating modes: Digits Lower case Upper case (SPC)_0 (SPC)_0 .@1,?!- .@1,?!- /():;&%*#+<=>$[] /():;&%*#+<=>$[]...
  • Page 17 Menu Redial Settings menu XML Add-on (planned) Establish 3-party conference Do not disturb mode on/off Call hold/unhold Call transfer Record a call (with server support only!) Connect to Mailbox LED for MWI (Message waiting indication) snom technology AG • 17...

  • Page 18: Initialization

    3 6 0 U V 1 . 0 0 ] S N O M S E R A N U A L Initialization Booting The booting process comprises a series of different confi guration steps that set up the phone for future use by any user. Selecting the language The default language setting is English.

  • Page 19: Setting The Ip Address

    A valid IP address appropriate to the network in which the phone is being used can be provided. Setting the Netmask Similarly, the user will be asked to provide a Netmask. After entering the information, confi rm with snom technology AG • 19...

  • Page 20: Setting The Ip Gateway

    3 6 0 U V 1 . 0 0 ] S N O M S E R A N U A L Setting the IP Gateway If a valid Netmask has been provided, the user will be asked for the IP address of the IP gateway. After entering the information, confi rm with Setting the DNS Server The last item for this series of network-related confi...

  • Page 21: Selecting The Timezone

    fi rst account registration. Logging on the fi rst account If no number is assigned to the phone yet, you will be prompted to type in your account name. Confi rm your input with snom technology AG • 21...
  • Page 22 3 6 0 U V 1 . 0 0 ] S N O M S E R A N U A L This will be followed by the address of your registrar. The phone tries to guess the correct registrar, so the display could show something like this: Confi...
  • Page 23 SIP URI so that a pure IP call can be started instead of an IP/PSTN call. Regarding ENUM see also our white paper “ENUM on snom phones”! After entering each code, confi rm with The phone tries to register your given account name at the given registrar.
  • Page 24 3 6 0 U V 1 . 0 0 ] S N O M S E R A N U A L 24 • Installation...

  • Page 25: Logon

    To ease the effort of assigning the appropriate phone number to the phone for each individual employee, the snom 360 offers so-called mobility features, which are described in the following subchapters.

  • Page 26: Identity Handling

    3 6 0 U V 1 . 0 0 ] S N O M S E R A N U A L Identity Handling In idle screen press the menu key to call up the following menu, where you will fi nd the menu item “Identity”. The following submenu items are available.

  • Page 27: Reregister User

    The selected registration is logged off and, if it was the only one registered, the logon wizard, if enabled, is displayed again. Otherwise, the idle screen is displayed. snom technology AG • 27...

  • Page 28: Logoff All

    3 6 0 U V 1 . 0 0 ] S N O M S E R A N U A L Logoff All When you select this menu item and press the key, you will be asked if you really want to log off all users. If you confi...
  • Page 29 Repeat the same procedure for all accounts with authentication. The challenge responses are stored in the phone and will be used at reregistration or upon reboot. You can also edit this information via the web interface. snom technology AG • 29...
  • Page 30 3 6 0 U V 1 . 0 0 ] S N O M S E R A N U A L 30 • Logon...

  • Page 31: Basic Functions

    Dialing There are two methods to begin a call from the idle state of snom 360. You can either dial with the handset resting in the cradle and then pick it up or press , or you can pick up the handset or press then dial the number.

  • Page 32: Input Modes

    V 1 . 0 0 ] S N O M S E R A N U A L The snom 360 shows the current communication status in the display. Input Modes Depending on the context, various types of inputs are possible.

  • Page 33: Dialing A Phone Number

    Dialing a phone number A telephone number is dialed with the numeric keypad. If the user has not pressed any keys for several seconds, the phone will remind the user to press in order to start the call. snom technology AG • 33...

  • Page 34: Dialing A Sip Address

    3 6 0 U V 1 . 0 0 ] S N O M S E R A N U A L Key mapping: Moves the cursor to the left Moves the cursor to the right Deletes the character to the left of the cursor Changes input mode to numbers Changes input mode to capital letters Changes input mode to small letters...

  • Page 35: Dialing An Ip Address

    If the IP address dialing leads only to an error message, make sure both of the phones involved are using locally port 5060 for SIP signaling (see option “network identity port”)! snom technology AG • 35...

  • Page 36: Number Guessing

    3 6 0 U V 1 . 0 0 ] S N O M S E R A N U A L Key mapping: Moves the cursor to the left Moves the cursor to the right Deletes the character to the left of the cursor Changes input mode to numbers Changes input mode to capital letters Changes input mode to small letters...

  • Page 37: Terminating A Call

    . The snom 360 will terminate the call and return to the idle state. Incoming call When your snom 360 is called, it rings and displays the following screen: Accepting a call Picking up the handset or pressing will accept the call.

  • Page 38: Denying/Blocking A Call

    Transfer call Handsfree mode on/off Mute/Unmute the microphone Change the volume See below for further particulars. Denying/ blocking a call When the snom 360 signals an incoming call, you have the option to deny the call with 38 • Basic Functions...

  • Page 39: Adjusting The Volume

    Adjusting the volume In idle state or while making a call, you can use the keys to increase or lower the volume. The audio device (casing speaker, handset, headset) that you are currently using can be adjusted. snom technology AG • 39...

  • Page 40: Mute / Unmute

    DND Mode on/off The DND functionality is available in the snom menu. DND is short for “Do Not Disturb”. If this mode is activated with , incoming calls will no longer come through to the phone and you will be completely undisturbed by the phone, except for VIP calls.

  • Page 41: Handset / Handsfree / Headset

    If a headset is connected and the audio output is set to headset, the snom 360 will treat the headset as the output device for calls, which is indicated during a call by a small headset symbol on the bottom line.

  • Page 42: Programmable Keys

    3 6 0 U V 1 . 0 0 ] S N O M S E R A N U A L Key mapping: Switch to handsfree mode and back Switch to headset mode and back Accept incoming calls in headset mode Return phone to idle state Programmable Keys...

  • Page 43: Line

    LED and pick up the call by pressing that programmable key. This way, no calls go unanswered. snom technology AG • 43...

  • Page 44: Destination

    ‚Intercom‘ enables the intercom mode, and the phone will be directly connected to the set snom phone if authentication is set up properly. This feature is useful in an offi ce environment as a quick access key to connect to the operator or the secretary.

  • Page 45: Voice Recorder

    Shared Line The snom 360 offers users the option of sharing a single registration among multiple phones. This can be the case for a single outgoing identity for a SOHO environment using an ISDN/PSTN connection to the outside world, or when sharing a single line amongst multiple users in a localized offi...

  • Page 46: Dtmf

    3 6 0 U V 1 . 0 0 ] S N O M S E R A N U A L DTMF This option allows the specifi cation of arbitrary key sequences, which will be sent via DTMF when this button is pressed. Menus Press the menu key to call up the main menu.

  • Page 47: Adjusting The Display Contrast

    Key mapping: Reduce the contrast in steps Increase the contrast in steps Set contrast and return to idle state Return to idle state without setting the contrast snom technology AG • 47...

  • Page 48: Ring Tones

    3 6 0 U V 1 . 0 0 ] S N O M S E R A N U A L Ring Tones Select the submenu “Preferences”, to call up the following window: Select the submenu “RingTone”. Here, the ring tone can be set. The selected ring tone is played back and you can decide on the desired setting.

  • Page 49: About

    A N U A L About Call up the following window by pressing the key: This indicates the type of your phone, the application software version, the currently assigned IP address, and the MAC address of the phone. snom technology AG • 49...
  • Page 50 3 6 0 U V 1 . 0 0 ] S N O M S E R A N U A L 50 • Basic Functions...

  • Page 51: Advanced Functions

    When more than one call is on hold, the following window appears: Select the party you wish to talk to with the keys . Press to get connected. snom technology AG • 51...

  • Page 52: Transfer

    As soon as you press , the snom 360 will transfer the held party to that number. 52 • Advanced Functions...

  • Page 53: Consultation Transfer

    This behavior is available only if the option “Call join on Xfer” on the “advanced” web page is enabled. If this option is disabled you have to select the party you want the call to transfer to by pressing followed by the transfer keys snom technology AG • 53...

  • Page 54: Conference

    3 6 0 U V 1 . 0 0 ] S N O M S E R A N U A L Conference If the phone is connected with two calls, one on hold and one active, you can connect all three phones in a conference by pressing By pressing again or by pressing , the conference is...

  • Page 55: Divert When Busy

    This feature can be enabled via the menu item “Phone Behavior / Call Completion”. On busy (CCBS) When the party you are trying to reach is busy, the following window will appear during a call attempt: snom technology AG • 55...
  • Page 56 3 6 0 U V 1 . 0 0 ] S N O M S E R A N U A L By pressing , call completion is activated and the phone waits for the other party to return to idle. If you wish to receive and make calls while you are waiting for your call completion, press to return to the idle screen, which...

  • Page 57: On No Response (Ccnr)

    If you wish to receive and make calls while you are waiting for call completion, press again to return to the idle screen, which now shows the letters ‘CC’ in the lower-left corner. Pressing cancels the call completion procedure. snom technology AG • 57...

  • Page 58: Dtmf Tones

    3 6 0 U V 1 . 0 0 ] S N O M S E R A N U A L When the other side is available again, the display will prompt you to redial the number. Be aware that the activity detection only detects whether the other party is using the phone.

  • Page 59: Message Waiting Indication (Mwi)

    Back to the idle screen Message Waiting Indication (MWI) If you did not answer a call and the mailbox recorded a message for you, the idle screen shows that a recorded message is waiting for you. snom technology AG • 59...
  • Page 60 3 6 0 U V 1 . 0 0 ] S N O M S E R A N U A L The letter icon in the left upper corner of the idle screen indicates that the call was recorded for the SIP account listed to the right of it. After pressing , you will see a screen similar to the following one with the number of new and old recorded messages:...

  • Page 61: Maintenance Menu

    Key mapping: Scroll the message forward Scroll the message backward / handset off Call mailbox to listen to recorded messages hook / Back to idle screen Maintenance Menu Pressing the key calls up the maintenance menu: snom technology AG • 61...
  • Page 62 3 6 0 U V 1 . 0 0 ] S N O M S E R A N U A L Key mapping: Move the cursor down Move the cursor up Enter the submenu Return to the previous menu The maintenance menu has the following options: User/Administrator Mode Via this option you can change to User or Admin mode, respectively.

  • Page 63: Conducting A Software Update

    During boot-up, the phone asks you whether or not it should proceed with the boot loader and/or fi rmware update. If the phone does not reboot by itself, please reboot the phone manually. snom technology AG • 63...
  • Page 64 3 6 0 U V 1 . 0 0 ] S N O M S E R A N U A L 64 • Advanced Functions...

  • Page 65: Call Register

    Call Register Phone book The snom 360 contains an internal phone book that can be accessed from the phone’s idle state by pressing Key mapping: Scroll to the next item Scroll to the previous item Enter edit mode for the selected entry...

  • Page 66: Adding An Entry

    3 6 0 U V 1 . 0 0 ] S N O M S E R A N U A L Adding an entry In order to add a new entry, select the list item <New item> and press Enter the name and phone number and confi...

  • Page 67: Editing An Entry

    DND is ‘active’! Delete whole address book If you want to delete the entire address book, click onto the “Delete” button on the web interface page of the address book . snom technology AG • 67...

  • Page 68: Export

    3 6 0 U V 1 . 0 0 ] S N O M S E R A N U A L Export To save the content from a fi lled phonebook, right-click onto the the “Click here” link at the bottom of the “Addressbook” page on your built-in web interface “Click here to save the current address book.”...

  • Page 69: Import

    fi le entries will replace the old ones (just like editing the old entry to save a different name). If the name is the same but the number is not, a new entry will be made. snom technology AG • 69...

  • Page 70: Preview

    3 6 0 U V 1 . 0 0 ] S N O M S E R A N U A L Preview A preview feature is available while importing fi les for the phone book. One way to do this is to use a Comma-Separated Values (CSV) fi...

  • Page 71: Call Lists

    fl ash and can be retrieved anytime until they are deleted or a factory reset is performed. Call Lists The snom 360 maintains lists of missed, received, and dialed calls that can be accessed by pressing the key from the idle state.
  • Page 72 3 6 0 U V 1 . 0 0 ] S N O M S E R A N U A L Key mapping: Scroll to the next call Scroll to the previous call Show details of this call Delete the current entry Dial the number of the current entry off hook Return phone to idle state...

  • Page 73: Speed Dial

    / off hook Return the phone to the idle state Speed Dial The snom 360 supports speed dial of up to 33 numbers. These are mapped onto the numbers 0-30 and the * and # keys. Dialing Speed dialing is initiated by typing in a number from 0-30, *, or #, respectively, and confi...

  • Page 74: Editing Speed Dial Entries

    Set up the speed dial numbers on the built-in web interface page of your phone. Deny List The snom 360 gives you the option of putting telephone numbers on a deny list to prevent incoming calls from these numbers. Browsing To look at the numbers currently on your deny list, go to the web interface Address Book page.

  • Page 75: Adding A Number

    Address Book and selecting the contact type “Deny list”. Removing a number There are two ways to remove a number from the deny list: (1) On the “Address Book” webpage, click onto the small red crossed icon at snom technology AG • 75...
  • Page 76 3 6 0 U V 1 . 0 0 ] S N O M S E R A N U A L the end of the line you want to delete. (2) Change the contact type on the “Address Book” webpage. 76 •...

  • Page 77: Settings

    Settings A long list of different settings is available, which can be used to control the behavior of the snom 360. These settings are explained in the white paper “Confi guring snom phones for Mass Deployment”, which you will fi nd at http://www.snom.com. The white paper “How can I update a snom phone?”...

  • Page 78: Settings Via Web Browser

    It is usually more convenient to use the web browser to confi gure the settings. The snom 360 has an integrated web page for this purpose. If the phone is connected to a network that provides DHCP, it can be...
  • Page 79 There is a selection menu on the left side of the web page. Click on the desired submenu; the current settings of this submenu will be displayed in the larger blue fi eld on the right. snom technology AG • 79...

  • Page 80: Settings Options

    3 6 0 U V 1 . 0 0 ] S N O M S E R A N U A L You can now modify and store the values by using mouse and keyboard. To save the changes, click on the SAVE button. Do NOT press SAVE if you want to discard the changes.
  • Page 81 Use Headset Device: Select the headset device you would like to use. Select none if you don’t want to use a headset. Use Backlight: The snom 360’s display has a built-in backlight. If you set this function to ‘on’, the backlight will be turned on when you press a key on the phone.
  • Page 82 3 6 0 U V 1 . 0 0 ] S N O M S E R A N U A L “Event” drop-down menu options: Never: This deactivates all call redirections. Always: All calls are diverted to the number specifi ed in “Number Redirect”.
  • Page 83 Ringtone defaults Ringer Device for Headset: If you want to hear the ring tone via the headset only, choose “headset”; otherwise, “speaker” as usual. Default Ringer: Choose the default ringing melody for your snom phone through this setting. Address Book Ringtones Specify the ringing melodies for different contact types of your personal phone book entries (e.g.., “friends”) by choosing a ringer from...
  • Page 84 3 6 0 U V 1 . 0 0 ] S N O M S E R A N U A L Auto answer for the seven lines on your phone is turned on or off on the “Confi guration Line 1-7” pages, tab “SIP”. “Auto answer indication” and “type of answering”...

  • Page 85: Setup Speed Dial

    Set up your speed dial numbers on this webpage. The available speed dialing codes are the numbers 0 through 30 and the # and * keys. To dial one of them, press the respective key(s) and confi rm with snom technology AG • 85...
  • Page 86 3 6 0 U V 1 . 0 0 ] S N O M S E R A N U A L Function Keys It is possible to program the functions “Line”, “Destination”, “Intercom”, “Park Orbit” and “Voice Recorder” onto the function keys with LEDs.

  • Page 87: Setup Lines 1-7

    After a successful registration, the registrar knows how to reach this specifi c line and can route requests (e.g., incoming calls) from other registered parties to this phone. snom technology AG • 87...
  • Page 88 3 6 0 U V 1 . 0 0 ] S N O M S E R A N U A L Authentication Username: Registrar environments may need different user names for registration and authentication. Mailbox: If you have set up a mailbox, specify the account name for that mailbox here to associate it with this particular SIP line.
  • Page 89 With a dial plan, you can match user input (digits via keyboard) to specifi c actions like dialing, using a distinct outgoing identity, etc. Please have a look at our white paper “Dial plan on snom phone” on our website. snom technology AG • 89...
  • Page 90 3 6 0 U V 1 . 0 0 ] S N O M S E R A N U A L Q-Value: You can set up the probability of a registration for each line through this setting (the default is 1.0). This means that different registrations with different Q-values will ring in serial order (serial forking) in contrast to different registrations with the same Q-values, which will ring in parallel (parallel forking).
  • Page 91 60 ms. All other codecs work with 20, 40 and 60 ms only. RTP Encryption: The snom 360 supports RTP encryption via SRTP. If you want to encrypt your outgoing RTP (audio) stream, switch this option to “on”. If, during a call, a small lock sign is shown on the display, this means that an SRTP encrypted call is currently taking place.

  • Page 92: Action Urls

    3 6 0 U V 1 . 0 0 ] S N O M S E R A N U A L RTP encryption has nothing to do with SSL/TLS. The keys are sent in the SDP part of SIP messages. Certifi cates are not used for this. (See also our white paper “Providing Security in VoIP Environments”!) Action URLs An “Action URL”...

  • Page 93: Setup Advanced

    (NOT the VoIP gateway). It is the address to which the packets get routed when the desired packet address is not in the current subnet. Setting up this parameter is mandatory in order to reach an external network. snom technology AG • 93...
  • Page 94 3 6 0 U V 1 . 0 0 ] S N O M S E R A N U A L Domain: Specify the DNS domain for your phone here. DNS Server 1: Specify the IP address of the DNS server for your network here.
  • Page 95 We urge you strongly to leave it on “off” if you are not absolutely sure that it is supported by your proxy/registrar. Webserver connection type: Set up the type of connection the phone’s webserver is willing to answer to: snom technology AG • 95...

  • Page 96: Phone Behavior

    3 6 0 U V 1 . 0 0 ] S N O M S E R A N U A L • http • https • http & https • Please be advised that you will no longer be able to use the web interface of the phone when you select “off”! If this has happened and you wish to change this setting, use the phone to do it.
  • Page 97 “Deny List”. Challenge Response on Phone: As explained in an earlier chapter, snom phones can handle challenge responses on the phone. Turning this setting off will disable this feature and you will only be able to handle authentication through the web interface of the phone.
  • Page 98 INFO message in SIP. This code can later be used for billing or bookkeeping along with the call ID of that call. Dialog-Info Call Pickup: snom phones subscribe to the status information of SIP URLs mapped as “Destination” on the programmable keys.
  • Page 99 Select “Charged” to show the accumulated amount of the current call on the display; select “Balance” to show the amount remaining on your account. snom technology AG • 99...
  • Page 100 3 6 0 U V 1 . 0 0 ] S N O M S E R A N U A L AOC Pulse currency: Sets the currency symbol that will be shown next to the amount (e.g., $). AOC Cost/Pulse: Specify how much money one pulse costs (e.g., 0.12 means 12 cents per pulse) Keys Here you can change the key behavior on the phone to suit your...
  • Page 101 Advanced Network In this subsection you can change the advanced network settings of your phone: snom technology AG • 101...
  • Page 102 3 6 0 U V 1 . 0 0 ] S N O M S E R A N U A L Dynamic RTP port start, Dynamic RTP port stop: If you want to set up the port range out of which the RTP ports will be dynamically taken, specify the start port and end port number, respectively, in these fi...
  • Page 103 Require PRACK: To force the use of PRACK, choose “on” here. “PRACK” messages are used to acknowledge the receipt of “180 Ringing” messages, which are usually not acknowledged. This helps, for example, to inform gateways whether the phone has actually begun to ring. snom technology AG • 103...
  • Page 104 3 6 0 U V 1 . 0 0 ] S N O M S E R A N U A L Offer GRUU: This setting is used to toggle the support for GRUU (Globally Routable User agent URLs) in SIP. When several phones have the same account, each one of them can be identifi...
  • Page 105 VLAN and that it can only be assigned to one VLAN at a time. DEBUG Syslog Server: Type in the host where a Syslog Server is running to store the log messages coming from the phone. snom technology AG • 105...
  • Page 106 LCServer: Type in the IP address of the remote LCServer if you want your phone to connect to it. Normally, you do not need to make an entry here. The LCServer is for snom’s internal development only. SNMP Regarding SNMP, see our white paper “SNMP” on snom phones! Port: Type in the port to be used for SNMP communication.

  • Page 107: Setup Trusted Certifi Cates

    Setup Trusted Certifi cates On this page, certifi cates from trusted authorities can be imported to create an internal CA list. The page may look like this: snom technology AG • 107...

  • Page 108: Setup Software Update

    3 6 0 U V 1 . 0 0 ] S N O M S E R A N U A L The phone looks up on this table whether an incoming TLS request should be accepted because it is verifi ed or has been signed by a CA. In the case of SIPS, the phone acts as a client.

  • Page 109: Status

    PCAP Trace Create packet traces from current network traffi c right on your phone! This is a really powerful tool to fi nd out what is going on in the network around your phone. snom technology AG • 109...
  • Page 110 3 6 0 U V 1 . 0 0 ] S N O M S E R A N U A L When you press the “start” button on this page, the tracing will start and record every incoming or outgoing packet addressing your phone.

  • Page 111: Appendix

    Standard Conformance Name and address of manufacturer snom technology AG Gradestr. 46 12347 Berlin The snom technology AG assures that the product Type: VoIP Phone Model: snom 360 conforms with the following standards Product Standard EN 55 054 Product Standard IEC 60950-1:2001 EN 60950-1:2001 + A11:2004 CB-Certifi...
  • Page 112 3 6 0 U V 1 . 0 0 ] S N O M S E R A N U A L 112 • Appendix...

  • Page 113: Index

    Adding a number 75 Call Lists 71 Removing a number 75 Denying a call 38 Destination. Programmable Keys Incoming call 37 DHCP 93 Terminating a call 37 Dialling 31, 73 Call completion Dialing an IP address 35 snom technology AG • 113...
  • Page 114 3 6 0 U V 1 . 0 0 ] S N O M S E R A N U A L Dialing a phone number 33 Headset Device 81 Dialing a SIP address 34 Hold and resume 51 Editing speed dial entries 74 HTTP 95 Speed Dial 73 HTTP port 95...
  • Page 115 Reset Values 62 Ringtones 82 Offer ICE 90 RTP Encryption 91 Open phone book 17 RTP Line 91 Outbound Proxy 89 Safety Notes 9 Packet Size 91 Cleaning 14 Park orbit. Programmable Keys Connecting the phone 14 snom technology AG • 115...
  • Page 116 3 6 0 U V 1 . 0 0 ] S N O M S E R A N U A L Setting up the Phone 10 Security 106 Settings 77 Unmute 40 NAT Line 90 Update 104 Privacy Settings 84 Software update 108 RTP Line 91 Settings Options 80...

  • Page 117: Snom Technology Ag

    Reader‘s Feedback snom technology AG welcomes your evaluation of this manual and any suggestions you may have. These help us to improve the quality and usefulness of our documentation. Please send your comments and suggestions to: snom technology AG Attention: Marketing Department...
  • Page 118 Europe & ROW: snom VoIP Phone snom 360 User Manual snom technology AG © 2005 snom technology AG Phone: +49 (30) 39833-0 All rights reserved. mailto:info@snom.com Subject to change without notice. http://www.snom.com sip:info@snom.com www.snom.com...

Table of Contents