Keypad - Snom 360 Manual

Table of Contents

Keypad

The numeric keypad with the keys 0 to 9, *, and # is used to enter
digits and letters. Depending on the operating mode, different actions
can be performed (see the table below):
−
−
Use the MENU key
use the CANCEL key
and inputs. For navigation use the big round navigation key in the
middle.
Depending on the operating mode, the keys can have context-specific
meanings which are described in the manual.
The four soft keys located below the display are context-sensitive
function keys. Their current mapping is depicted with symbols in the
bottom line on the display.
The twelve keys on the right with LEDs
programmable function keys onto which different functionalities can be
mapped.
The keys of the numeric block in different operating modes:
Key
Entry of digits only (e.g., when dialling a phone number)
Typing in letters and digits by pressing the keys repeatedly
(similar to a cellular phone), etc.
to call up the menu. To cancel actions or input,
. The ENTER key
Digits Lower case
0 (SPC)_0
1 .@1,?!-
/():;&%*#+<=>$[]
confirms actions, selections
/ next to them are the
Upper case
(SPC)_0
.@1,?!-
/():;&%*#+<=>$[]
13