User Mode/Administrator Mode - Snom D120 User Manual

D120 User Manual
U
ser mode/administrator mode
Snom phones can be operated in administrator or user mode. In administrator mode, all settings are
accessible and can be modified; in user mode, a number of settings are not accessible. The factory
default is administrator mode.
When the phone is running in user mode, the administrator password is required to revert to
administrator mode. The default administrator password is 0000 (4 x zero). We recommend that you
change the password for security reasons.
Note: Do not forget to write the new password down and store it in a safe place; without
it, a TFTP reset to factory values is necessary to return the phone to administrator
mode.
If your phone is administered centrally, user mode may be the rule. Please check with
your administrator.
User mode on the phone
The "Network" menu and various other settings are inaccessible in user mode. See
"Settings" on page 27.
User mode on the web interface
Some windows like Preferences are available in user mode while many others, like the identities,
are not. The menu item Advanced is available in user mode but the settings normally found on the
Advanced Settings page are not. In user mode the two pages look like this:
Fig. 1
To return the phone and its web interface to administrator mode, open the Advanced Settings page,
enter the administrator password in Administrator Login and click on "Apply" (Fig. 2). The default
password is 0000 (4 x zero). In administrator mode, the two pages look like this:
Fig. 2
33
Getting to Know Your Phone