Peer Server Id Configuration For Cs Core Network - Cisco ASR 5000 Series 3G Home NodeB Administration Manual

HNB-GW Service Configuration Procedures
peer-server id <peer_server_id>
name <sgsn_name>
mode {loadshare | standby}
routing-context <routing_ctxt_id>
self-point-code <sgsn_pointcode>
psp instance <psp_instance_id>
psp-mode {client | server}
exchange-mode [double-ended | single-ended]
end-point address <end_point_address>
associate asp instance<asp_instance>
end
Notes:
 <
ss7rd_id
 <
sgsn_pointcode
used for SCCP network instance.

Peer Server Id Configuration for CS Core Network

Use the following example to configure the Peer Server Id in SS7 routing domain for CS core network on system:
configure
ss7-routing-domain <ss7rd_id> variant <v_type>
peer-server id <peer_server_id>
name <msc_name>
mode {loadshare | standby}
routing-context <routing_ctxt_id>
self-point-code <msc_pointcode>
psp instance <psp_instance_id>
psp-mode {client | server}
exchange-mode [double-ended | single-ended]
end-point address <end_point_address>
OL-25069-03
> is SS7 Routing domain identity number already configured for SS7 routing domain instance.
> is the address of SGSN configured in HNB-PS Network Configuration section and to be
Cisco ASR 5000 Series 3G Home NodeB Gateway Administration Guide ▄
HNB-GW Service Configuration ▀
77