Cisco ASR 5000 Series 3G Home NodeB Administration Manual page 139

IP Security
Step 4 Configure an ipsec-isakmp crypto map according to the instructions located in the
section of this chapter.
Step 5
Apply the crypto map to an interface on the system according to the instructions located in the
Interface Association
Step 6
Save your configuration to flash memory, an external memory device, and/or a network location using the Exec mode
command
save configuration
System Administration Guide and the Command Line Interface Reference.
OL-25069-03
section of this chapter.
. For additional information on how to verify and save configuration files, refer to the
Implementing IPSec for PDN Access Applications ▀
Cisco ASR 5000 Series 3G Home NodeB Gateway Administration Guide ▄
ISAKMP Crypto Map Configuration
Crypto Map and
139