Configuring Alcap Service And Aal2 Node - Cisco ASR 5000 Series 3G Home NodeB Administration Manual

HNB-GW Service Configuration Procedures
configure
ss7-routing-domain <ss7rd_id> variant <v_type>
ssf {international | national | reserved | spare}
linkset id <linkset_id>
self-point-code <self_pointcode>
adjacent-point-code <adj_pointcode>
link id <link_id> link-type atm-broadband
priority <link_priority_value>
signaling-link-code <sig_link_code>
exit
exit
route destination-point-code <rd_pointcode> linkset-id <linkset_id>
end
Notes:
 <
ss7rd_id

Configuring ALCAP Service and AAL2 Node

To configure the ALCAP service with AAL2 node a nd AAL2 path parameters apply the following example:
configure
context <alcap_ctxt_name>
alcap-service <alcap_svc_name> -noconfirm
associate ss7-routing-domain <ss7rd_id>
self-point-code <alcap_pointcode>
aal2-route endpoint <AESA_route_endpoint> aal2-node <aal2_node_name>
aal2-node <aal2_node_name>
point-code <aal2_pointcode>
aal2-path-id <aal2_path_id> [block]
end
Notes:
OL-25069-03
> is pre-configured SS7 Routing Domain instance for IuCS-over-ATM in HNB-GW service.
Cisco ASR 5000 Series 3G Home NodeB Gateway Administration Guide ▄
IuCS over ATM Configuration ▀
87