IP Security
Verifying the ISAKMP Policy Configuration
These instructions are used to verify the ISAKMP policy configuration.
Step 1
Verify that your ISAKMP policy configuration by entering the following command in Exec Mode in specific context:
show crypto isakmp policy priority
This command produces an output similar to that displayed below that displays the configuration of an ISAKMP policy
with priority 1.
1 ISAKMP Policies are configured
Priority : 1
Authentication Method : preshared-key
Lifetime : 120 seconds
IKE group : 5
hash : md5
encryption : 3des-cbc
related security association has been cleared. Refer to the
command located in the Exec Mode Commands chapter of the Command Line Interface Reference for more
information.
OL-25069-03
Caution:
Modification(s) to an existing ISAKMP policy configuration will not take effect until the
clear crypto security-association
Cisco ASR 5000 Series 3G Home NodeB Gateway Administration Guide ▄
ISAKMP Policy Configuration ▀
155