Adjust Volume; Ringer Volume; Speaker Volume; Automatic Fax Redial - HP 1010 User Manual

• SUPER FINE works well for documents containing extremely fine detail. SUPER FINE
only works if the remote machine also has the SUPER FINE feature.
Tip! SUPER FINE mode is not used when sending documents scanned into
memory (i.e., Broadcasting and Delayed Fax). If you are sending document using
one of these methods, SUPER FINE will be changed back to FINE even though
you selected SUPER FINE.
If the Scan & Fax Mode light is on and SUPER FINE is chosen, the fax will be sent as
if the light were off.
3
Press Ans.Mode/Contrast repeatedly to select the option you want.
• NORMAL works well for normal handwritten, typed, or printed documents.
• LIGHTEN works with very dark print.
• DARKEN works with light print or faint pencil markings.
• PHOTO is used when faxing photographs or other documents containing color or
gray shades. When Photo is chosen, the resolution is automatically set to FINE.
4
Dial the number and press Start/Enter or press Copy.
When sending/copying is finished, resolution/contrast automatically returns to default.

adjust volume

You can adjust the volume level for both the ringer and the speaker (the speaker is used for
Loudspeaker).

ringer volume

Press
• Whenever you press the button, it will increase or decrease the volume.
• The volume 0 indicates that the machine will not ring when a call is received.

speaker volume

1
Press Loudspeaker.
2
Then press

automatic fax redial

When you send a fax, if the number you have dialed is busy or there is no answer, the
machine will attempt to redial the number every three minutes up to two times.
Before redialing, the display shows To redial now, press Start/Enter.
If you want to redial the number immediately, press Start/Enter.
Or, press Cancel to cancel redialing and then the machine returns to Ready mode.
adjust volume
when the fax is in Ready mode to adjust the volume of the ringer.
to adjust the volume of the speaker.
hp fax 1010 series
21