Set Rings To Answer; Use Caller Id; Turn Caller Id On - HP 1010 User Manual

hp fax 1010 series
• TAM mode
• TEL mode

set rings to answer

You can select the number of rings that will occur before the fax answers an incoming call.
If you are using your machine as both a telephone and a fax machine, we suggest you set
the ring count to at least 4 to give you time to answer.
1
Press Menu repeatedly until SET UP SYSTEM displays and press Start/Enter.
Language will display.
2
Use the
3
Enter the number of rings you want (2–7) and press Start/Enter.

use Caller ID

Many countries have the Caller ID system that enables the receiver to view the numbers or
names of callers. Once you have subscribed to Caller ID services, your machine can display
caller information.

turn Caller ID on

1
Press Menu repeatedly until SET UP SYSTEM displays and press Start/Enter.
2
Use the
3
Use the
• On: Activates the Caller ID feature.
• On /w Junk Fax: Activates Caller ID and ignores any fax registered as a junk fax
(see block junk fax numbers on page 13).
• Off: Deactivates the Caller ID feature.
12
You must have an answering machine attached to the EXT line socket on your
fax machine.
TAM
• In Ready mode, appears in the right hand corner of the display.
• When a call comes in, the answering machine answers and records the
caller's message if they leave one. If the machine detects a fax signal, it goes
into receive mode.
• If you have set your machine to TAM Mode and your answering machine is
switched off or the answering machine is not connected directly to your fax
machine, the machine will automatically go into receive mode after several
rings.
• If your answering machine allows you to set the number of rings before it
answers the telephone, set the answering machine to answer an incoming
call in less than 4 rings.
• When your answering machine answers an incoming call, it records a fax
tone until it realizes a fax is coming through. Due to this, your answering
machine may tell you a voice message has been left, even when it is actually
a fax.
TEL
• In Ready mode, appears in the right hand corner of the display.
• Automatic fax reception is turned off. You can receive a fax only by lifting the
handset and pressing Start/Enter .
to scroll to Rings to Answer and press Start/Enter.
to scroll to Caller ID and press Start/Enter.
to scroll to the desired option and press Start/Enter.
set up your fax