3
Additional
features
This chapter contains information on additional features you may want to set or change
for your HP Fax.
•
Rings to answer: Sets the number of rings before the HP Fax answers the phone.
•
Caller ID: If you subscribe to Caller ID through your local phone company, you can
use it with your HP Fax.
•
Block Junk Faxes: In conjunction with Caller ID, you can block certain numbers
from sending you a fax.
•
Favorites
•
Image TCR
•
Distinctive Ring
•
Answer/Receive
mode: Determines how the HP Fax responds to incoming calls.
1
The "arrow buttons" located at the left and right of OK button on the control panel are
designated by _ _ in the instructions.
Set rings to answer
You can select the number of rings that will occur before the fax answers an incoming
call.
NOTE:
If you are using your machine as both a telephone and a fax machine,
we suggest you set the ring count to at least 4 to give you time to answer.
1.
2.
3.
Press Menu repeatedly until BASIC FAX displays and press OK.
Press < _, until Rings
to
Answer
displays and press OK.
Enter the number of rings you want (2-7) and press OK.
The HP Fax rings the set number of times and then answers. It then produces a
different sounding ring to alert you to which type of call is incoming.
•
The additional ring may occur once for a fax call
•
The additional ring occurs 5 times for a voice call.
Additional features
23