How To Operate Wireless Remote Controller In Service Mode - Canon DC10 E Service Manual

3-3 How to Operate Wireless Remote Controller in Service Mode

(1) To use the wireless remote controller in the service mode, set it at Remote controller code 2.
* To changeover to Remote controller code 2, press the "Remote controller setting" and "Zoom T" keys simulta-
neously for 2 sec.
* The remote controller furnished with the instrument cannot transfer to the service mode. For this purpose, use the
remote controller (ex. WL-D84) furnished with a conventional product.
3. START/STOP
5. SEARCH -
10. SEARCH SELECT
9. REW
7. FRAME -
1. DUBBING
13. PAUSE
No. Key Designation (in Normal Mode)
1 DUBBING
2 SLOW
3 START/STOP
4 SEARCH +
5 SEARCH -
6 FRAME +
7 FRAME -
8 FF
9 REW
10 SEARCH SELECT
11 PLAY
12 STOP
13 PAUSE
WL-D84
Fig. 5
Key Designation (in Service Mode)
SERVICE MODE
NORMAL MODE
CS+
FUNCTION +
FUNCTION -
HIGH ADDRESS +
HIGH ADDRESS -
ADDRESS +
ADDRESS -
MODE SELECT
DATA +
DATA -
STORE
4
DC10 E, DC20 E
SERVICE MODE / ADJUSTMENT
4. SEARCH +
11. PLAY
8. FF
6. FRAME +
Remote Controller
Code 2 setting
12. STOP
2. SLOW
Function
Change over to service mode
Change over to normal mode
Increases CS by 1.
Increases FUNCTION by 1.
Decreases FUNCTION by 1.
Increases HIGH ADDRESS by 1.
Decreases HIGH ADDRESS by 1.
Increases ADDRESS by 1.
Decreases ADDRESS by 1.
Change over to RD/WR mode
Increases DATA by 1.
Decreases DATA by 1.
Defines/w rites DATA.