Canon DC10 E Service Manual page 156

STATUS CODE
(ST)
Total of white dots
Error Code Table for CCD Pixel Missing Compensation (DC20 E)
In the DC20 E, if a pixel missing is found on the CCD pixels, it is required to scan each of the RG and GB images. Therefore, white
dot detection is performed twice, and the result of the detection is indicated on a bit basis.
Error No
00 Normal end
10 T he number of white dots has exceeded the upper limit in the first time of detection
20 T he number of white dots has exceeded the upper limit in the second time of detection
40
T he total number of white dots in the first time and second time of detection has exceeded the upper limit
80 In white dot detection, three consecutive missing pixels in a row are detected.
ERROR No
Fig. 23
Error Conditions
35
DC10 E, DC20 E
SERVICE MODE / ADJUSTMENT