Com Amplitude Adjustment - Canon DC10 E Service Manual

5-8-4 COM Amplitude Adjustment

MODE Display of monochrome master
M. EQ. Oscilloscope
TP/TRIG. Extension connector - pin 14 (EVF COM AC) / TP signal (self TRIG)
SPEC. 4.00 ± 0.05 [V]
Procedure)
(1) Carry out adjustment according to the table shown below.
ST EP
COM Amplitude 1) Make the setting shown at right.
Adjustment 2) Perform storing.
(press the PAUSE button.)
PROCEDURE
CS
0
±
4.00V 0.05V
Fig. 27
MONIT OR
Function MD ADDR DT
21 ST 000C "ADJ" Start of setting
RD ADJ Completion of setting
40
DC10 E, DC20 E
SERVICE MODE / ADJUSTMENT
Microcomputer operation