Checking The Lens Resetting - Canon DC10 E Service Manual

4-3 Checking the Lens Resetting

<Outline>
(1) Set up addresses according to the table shown below. Thus, using data marked with the arrows in the figure below, you can check
whether lens resetting has been completed or not.
* In case of 40 or 44, the zoom lens has not yet been reset.
* In case of 80 or 84, the focus lens has not yet been reset.
* In case of D4, the zoom lens and focus lens has been completion.
ST EP PROCEDURE
1 1) Make setting shown at right.
MONIT OR
CS Function ADDR MODE
2 08 312E RD
Fig. 10
9
DC10 E, DC20 E
SERVICE MODE / ADJUSTMENT
Microcomputer operation
DT
-- RAM data indication