Canon DC10 E Service Manual page 188

SET PRINT ORDER
• When you tried to print still images not designated for printing by using the Print command in the Card Playback menu.
CANNOT TRIM
• When you tried to trim still images with an image size of 160 × 120. Or, when you tried to trim a video where the aspect ratio
deviates significantly from 4:3.
READJUST TRIMMING
• When you tried to change the "STYLE" setting after making the trimming settings.
PRINTER ERROR
• When a problem occurs in the printer.
COMMUNICATION ERROR
• When an error has occurred during communication.
PRINTER IN USE
• When the printer is in use. Check the printer status.
PRINTER WARMING UP
• When the printer is warming up.
PAPER LEVER ERROR
• When the printer paper lever is in the improper position.
PRINTER COVER OPEN
• When the printer cover is open.
INCOMPATIBLE PAPER SIZE
• When an unavailable paper size was selected in the paper size menu after displaying the paper size menu and changing the
settings at the printer side.
CHECK PRINT SETTINGS
• When the printer setting status displays the current recording value and the PRINT/SHARE button was pressed even though this
value cannot be used by PictBridge when the printer is connected.
PRINT ERROR
• When an error due to some unspecified cause occurred in the printer.
TRANS ORDER ERROR
• When the image quantity that can be set was exceeded.
23
DC10 E, DC20 E
SERVICE HINTS