Using The Zoom Rockers, Wireless Controller Or Optional Remote Control - Canon XF300 Instruction Manual

3
[l Camera Setup]
[Zoom]
[Speed Level]
[Normal]
[l Camera Setup]
[Zoom]
[Grip Rocker]
[Variable]
[l Camera Setup]
[Zoom]
[Constant Speed 8]
78
Zooming
Recording
Using the Zoom Rockers, Wireless Controller or
Optional Remote Control
When you operate the zoom, a zoom indicator* will appear on the screen
that shows the approximate zoom position. To use the zoom rockers,
make sure to set the ZOOM switch to ROCKER in advance.
* You can use the [J Other Functions]
setting (0 126) to set the zoom indicator to a numerical display.
Using the Grip Zoom Rocker
Use the functions in the [l Camera Setup]
the zoom speed. When you select a constant zoom speed, set one of 16
constant speeds (1 is the slowest, 16 the fastest). With a variable zoom
speed, press gently for a slow zoom; press harder for faster zooms.
Move the zoom rocker toward
toward
Setting the Zoom Speed
Refer to the following table for approximate zoom speeds of the entire
zoom range (end to end).
1 Open the zoom [Speed Level] submenu.
[l Camera Setup]
2 Select [Fast], [Normal] or [Slow] and then press SET.
3 Open the [Grip Rocker] submenu.
[l Camera Setup]
4 Select [Constant] or [Variable] and then press SET.
To set the speed level for [Constant]
5 Open the grip rocker [Constant Speed] submenu.
[l Camera Setup]
6 Select the desired level and then press SET.
P
to zoom in (telephoto).
[Zoom]
[Zoom]
[Zoom]
[Custom Function] [Zoom Indicator]
[Zoom] submenus to set
Q
to zoom out (wide-angle) and
[Speed Level]
[Grip Rocker]
[Constant Speed]