Options; Introduction - Intermec EasyCoder F2 User Manual

Options

Introduction

Label Taken Sensor
Short Side Door
Long Side Door
Intermec EasyCoder F2 – User's Guide
The EasyCoder F2 provides a high degree of fl exibility because
it has a modular design. By adding options to the basic printer,
the EasyCoder F2 can be adapted for a variety of applications.
Most options can easily be installed by the operator, however a
few should be installed by an authorized service technician or are
only available as factory-installed options.
Transfer Ribbon Mechanism
Chapter 8
Interface Board
(various types)
Media Supply Roll Post
1.5-inch Rotating
Supply Hub
3-inch Adapter
Liner Takeup
and Guide Shaft
Quick-Load Guides
(included)
47