Interface Boards - Intermec EasyCoder F2 User Manual

Interface Boards

Intermec EasyCoder F2 – User's Guide
A number of different interface boards are available for use with
the EasyCoder F2. The interface boards are either factory-fi tted
or can easily be fi tted by an authorized service technician.
The EasyCoder F2 can accommodate one interface board.
The IPL version of the EasyCoder F2 supports two of these
inerface boards:
• Parallel Interface Board (IEEE 1284)
• EasyLAN 100i Interface Board (Ethernet)
Refer to Appendix 3, "Interfaces" for more information on inter-
face boards.
Chapter 8 Options
49