Printer Options; Communications Interfaces; Finishers - Intermec EasyCoder 4420 User Manual

A
Specifications

Printer Options

This page contains a list of all the options you can use with the 4420 and 4440 printer
along with a brief description. Consult your local Intermec representative to order any
option.

Communications Interfaces

You can order any of these field- or factory-installable communications interfaces for
the printer.
EasyLAN 10i Interface
This option lest you connect the printer to a 10BaseT Ethernet network. Various
network printing protocols are available. For more information, see the EasyLAN 10i
documentation.
Coax Interface
This option lets you connect the printer to an IBM 3270 Type A coax cable computer
system operating in the VTAM (CICS/IMS/TSO) or 8100 (DPPX) environment. The
printer will emulate an IBM 3287 printer and you can connect it to an IBM 3174/76/99
system controller/multiplexer.
Twinax Interface
This option lets you connect the printer to an IBM twinax cable system with a twinax
interface. The printer will emulate an IBM 5256 Model 1 printer and can operate with
an IBM System/34, System/36, System/38, or AS/400 host computer.

Finishers

Cutter
The cutter option lets you cut continuous media into individual labels ready for use.
You can also order two different trays that will catch the labels as they are cut.
Self-Strip/Full Roll Batch Takeup
The self-strip option allows labels to be peeled from the liner as they print and
presented for immediate application to a surface (such as a shipping box). The batch
takeup enables you to run the printer in batch mode and is capable of taking up a full
roll of media. This option is factory-installed only.
A-7