Introduction; Easycoder F2; Appendix - Intermec EasyCoder F2 User Manual

Chapter 1

Introduction

EasyCoder F2

6
The EasyCoder F2 is a sturdy medium-duty direct thermal/
thermal transfer printer with a printhead resolution of 8 dots per
mm (203.2 dots per inch) and a maximum print width of 56
mm (2.2 inches).
The EasyCoder F2 is delivered with the Intermec Programming
Language (IPL-3 version 1.3) installed. There is also a version
of the EasyCoder F2 that uses the Intermec Fingerprint Program-
ming Language. Mechanically, the IPL version is identical to the
Intermec Fingerprint version, but a few options are not supported
by IPL-3, for example:
• Double serial interface board
• Industrial interface board
• 13.56 MHz RFID interface board
• Memory cards (except for fi rmware upgrading)
• EasySet bar code wand and interface
• USB interface
• Real time clock circuit
In most respects, the EasyCoder F2 IPL version is compatible
with other IPL printers from Intermec. Please refer to Appendix 4
for a list of supported IPL-3 commands.
Intermec EasyCoder F2 – User's Guide