The description of every item is listed as follows:
Item
Select Camera
Record Mode
Motion Detection
Setting
Please select an IP camera from the list to setup its
recording behavior. SKYROS
connect to selected IP camera, if
you will receive an error m
You can decide the recording behavior for this IP
camera:
Monitor only, not record: SKYROS iView will
not record video of this IP camera.
Round The Clock: SKYROS iView will record
video of this IP camera all the time.
Motion Detection: SKYRO
record video when motion is detected.
Apply to All Camera
apply current record control settings to all IP
cameras on the list.
Sets motion detection area and sensitivity. Please
select an IP camera from the list, and its video will
appear with a grid pattern:
Use the mouse to click blocks on the grid pattern to
assign the areas you wish SKYROS iView to detect /
ignore motion. SKYROS iView will detect motion for
areas which are NOT covered by blocks only.
DG-SC3800P User Manual
Description
iView will attempt to
it's not connectable,
essage later.
S iView will only
s: Click this button to
97