Table of Contents
Advertisement
The description of every setup item is listed below:
Item
Weekly Schedule Select the time period in a week of this schedule.
Events
Dedicated
S
chedule
There are total 48 x 7 blocks in a week schedule,
where every block represents half an hour.
You can use mouse to click on the block to add or
delete time period. If recording is activated in that
time period, the block will appear as light blue.
To add or delete a time period, select 'ADD' or
'DEL' first, then click the time period block. In order
to start the schedule recordings click the schedule
button
on the main screen of the software.
Select the event to trigger recording:
Round-The-Clock: Recording is time activated
(according to schedule).
Motion Detection: Recording is motion-activated.
DI Input: Recording is activated by DI (Digital
Input) signal located on IP camera. IP camera must
have DI port and not every IP camera is equipped
with DI.
If you just want to add a new recording schedule
between certain time and this schedule will only
happen once but not every week, you can use this
function to specify a time period.
Select 'Start' and 'End' date / time, and click
'Add/Modify' button to add the time period to the
list. You can also select an existing time period and
make changes, and click 'Add /Modify' button to
DG-SC3800P User Manual
Description
105
Advertisement
Table of Contents
