Table of Contents
Advertisement
DG-SC3800P User Manual
Ensure that your Android device is wirelessly connected to the same wireless access point to
w
hich the DIGISOL IP camera's are connected.
In this page, you need to input the IP camera's parameters manually:
Name: You can define a name for this IP camera for easy identification.
Host: Here, you need to enter an IP Address or a Domain name i.e. URL of an IP
camera.
HTTP Port: Enter the HTTP port of an IP camera. Default port is 80 if any other
port is used, please enter that port.
RTSP Port
Enter the RTSP port of an IP camera. Default port is 554 if any
:
other port is used, please enter that port.
R
TSP Path: It's taken by default as "/mobile". You can modify the path as
"/stream1" or "/stream2"as per the image quality requirement.
User: Input the login username of IP camera. Default username is 'admin'.
Password: Input the password of IP camera. Default password is 'admin'.
Location: If you click on this field, it will open a window as shown below:
127
Advertisement
Table of Contents
