Here is the description of every setup item:
Item
Enable Motion
Detection
Enable
(Window 1 to
Window 3)
Title
(Window 1 to
Window 3)
Percentage
Sensitivity
When you finish with above settings, click 'Apply' button to save changes.
Check this box to enable motion detection.
Check this box to enable this motion detection
window. You can select window 1 to 3 to enable up to
3 motion detection windows. When a motion detection
window is enabled, a rectangular window will appear
on camera's view, with its title on the top.
‐ To move / resize a motion detection window:
‐ Move: Use the mouse to drag the title text.
‐ Resize: Use the mouse to drag the four corners
(upper-left/right, lower-left/right) to resize it. If you
only want to adjust width or height, drag the four
sidebars (top, bottom, left and right).
Input characters in the title field to change motion
detection area's title text so you can identify it.
Please note that you have to click 'Apply' button and
the text will change.
Select the percentage of pixel change that will trigger
motion detection alert. Select a lower percentage and
you can detect tiny changes in motion detection area.
Select the sensitivity level that will trigger motion
detection alert. Select a higher sensitivity and you can
detect tiny changes in motion detection area.
DG-SC3800P User Manual
Description
56