Digisol DG‐SC3800P User Manual page 62

To add a new event, click 'New' button and the description of every setup item is
listed below:
Item
Enable Setting
Title
Motion
Detection
Digital Input
1 ~ 2
Enable
Schedule Time
Enable FTP
Enable EMAIL Check this box and IP camera will send an Email to
Enable Samba
(Net Storage)
Enable SD
CARD
Trigger digital
output for xx
second(s).
Check this box to enable this event. If you just want to
disable this event temporarily, you can uncheck this box
to keep this event disabled without deleting it.
Input any description for this event so you can identify it
quickly. You can use alphabets, numbers and symbols
which include:!$-.@^_~ (Note: no spaces allowed).
Check this box and this event will be activated when one
of the motion detection windows detects motion.
Check this box and this event will be activated when
digital input 1 or 2 input signal is high or low (select
from dropdown list).
Check this box and this event will be activated when
designated weekday and time is reached.
You also have to check weekday box, and select time
from dropdown list. If you select 'Always' as time, this
event will be activated throughout the day.
Check this box and the IP camera will save the file on the
FTP server (refer to 'FTP Server' setting in 'Event
Server' tab) when this event is activated.
designated recipient address/es (refer to 'SMTP Server'
setting in 'Event Server' tab) when this event is activated.
Check this box and IP camera will save file on samba
server (refer to 'Samba Server' setting in 'Event Server'
tab) when this event is activated.
Check this box and IP camera will save file on SD card
when this event is activated. A working SD card must be
inserted into IP camera in advance.
Check this box and IP camera will trigger digital output
to 'high' state for 'xx' seconds when this event is
activated, where 'xx' seconds must be defined by the
dropdown list.
DG-SC3800P User Manual
Description
62