Digisol DG‐SC3800P User Manual page 59

Patrol Setting
When you finish, click 'Apply' button.
You can click 'GO Preset' button to move the
camera to preset point, or click 'Remove' to clear
this preset point setting.
When you have 2 or more preset points, you can
make the camera to move between these points,
this function is called as 'Patrol'.
To configure patrol, please setup preset points
first, then select the preset points that are not
required from the 'Patrol list' and click
button to remove them from the 'Patrol' list.
These preset points will then be added to the
preset list.
You can also adjust the order of preset points in
the patrol list: select a preset point and click
or button.
59
DG-SC3800P User Manual