Digisol DG‐SC3800P User Manual page 45

Here is the description of every setup item:
Item
Enable Filter
Accepted IP list
IP Address
(Accepted IP
list)
Deny IP list
IP Address
(Deny IP list)
When you finish with above settings, click 'Apply' button to save changes.
Check this box to enable IP address filter, uncheck this
Box to disable this function.
This list shows all IP addresses that can build
connections to this IP camera. If you want to remove a
set of IP addresses from the list, click on the IP address
and click 'Remove' button.
Input the starting and ending IP address for which you
wish to accept connections. IP camera will only accept
connections established from these IP addresses.
If you want to specify one IP address only, input the
same IP address in both fields.
Click 'New' button to add IP address into accepted IP
list.
It lists all IP addresses that cannot build connections to
this IP camera. If you want to remove a set of IP
addresses from the list, click on the IP address and
click 'Remove' button.
Input the starting and ending IP address of IP address
you wish to deny connections. IP camera will deny
connections established from these IP addresses.
If you want to specify one IP address only, input the
same IP address in both fields.
Click 'New' button to add IP address into deny IP list.
DG-SC3800P User Manual
Description
45