Table of Contents
Advertisement
DG-SC3800P User Manual
Ensure that your Apple device is wirelessly connected to the same wireless access point to
which the DIGISOL IP camera's are connected.
In this page, you need to input the IP camera's parameter manually:
Name: You can define a name for this IP camera for easy identification.
Host: Here, you need to enter an IP Address or a Domain name i.e. URL of an IP
camera.
HTTP Port: Enter the HTTP port of an IP camera. Default port is 80 if any other
port is used, please enter that port.
RTSP Port: Enter the RTSP port of an IP camera. Default port is 554 if any
other port is used, please enter that port.
RTSP Path: It is taken by default as "/mobile". You can modify the path as
"/stream1" or "/stream2" as per the image qual
ity requirement.
User: Input the login username of IP camera. Default username i
s 'admin'
Password: Input the password of IP camera. Default password is 'admin'
Location: You can also specify the location here if any.
Tap 'Save' to add the IP Camera and proceed.
When an IP camera has been added successfully, it will be listed under Device
List.
138
Advertisement
Table of Contents
