Pitch Curve; To Access The Pitch Curve Function; Hovering Pitch Rocker - Spektrum DX7 User Manual

Pitch Curve

Adjustment of the pitch curve is very similar to the throttle curve adjustment described in the preceding section.
A thorough understanding of the throttle curve section will make pitch curve adjustment easier to understand.
The DX7 offers four (4) independent pitch curves: Normal, Stunt 1, Stunt 2 and Hold. Each pitch curve contains
five (5) adjustable points — L, 1, 2, 3, and H.
Note: When setting pitch curve for throttle hold, it is necessary for the throttle hold to be active
— if this function is inhibited, the throttle hold pitch curve will not be visible on the screen.
In the Function Mode, use the UP and DowN keys to select
Press to enter
Function Mode

To Access the Pitch Curve Function

Press the DowN and SELECT keys simultaneously to access the System Mode.
In System Mode, use the UP or DowN keys to select the
Press the SELECT button to access pitch points L (Low), 1, 2, 3, or
Press the INCREASE or DECREASE keys to change the selected pitch value or expo on/off.

Hovering Pitch Rocker

The hovering pitch rocker operates in the same manner as the hovering throttle rocker. It is operable while the
flight mode is in the N, or Normal, position, and its function is to shift the center point (#2) of the curve either
upward or downward to adjust pitch at the hover position.
SPEKTRUM DX7 • HELICOPTER PROgRAMMINg gUIDE
Press to enter
PITCH CURVE
[PITCH CURVE]
≥Point-3
IN
PITCH
Press to change values
NORM
INH
51 51
OUT
L 1 2
Press to select
desired points
PITCH CURVE NORM
CURVE.
3 H
Press to return
value to default
screen.
H (High) or EXPO.