Travel Adjust
Press to enter
Function Mode
To Access Travel Adjust
Turn the power on and press the DowN and SELECT keys simultaneously to enter the function mode.
Press the UP or DowN key until
arrow to the desired channel.
Use the SELECT key to choose the appropriate channel that you wish to adjust.
While holding the channel or switch in the desired direction, press the INCREASE or DECREASE key to adjust
the travel adjust in that direction.
This completes the basic Quick Start setup for your airplane. For additional features like Dual and Expo rates,
Mixing, etc, see the appropriate pages listed in the table of contents.
Note: If your airplane's ailerons are controlled independently by two servos, see "Wing Type
Selection" on Page 39 for specifics on programming flaperons.
Press to enter
TRAVEL ADJUST
[TRAVEL ADJUST]
≥H 100%
L 100%
D 100%
U 100%
TRAVEL ADJUST
Selected channel
THRO
AILE
L 100%
R 100%
ELEV
RUDD
L 100%
R 100%
Press to select
desired channel
appears on screen. Press the select key to move the cursor
SPEKTRUM DX7 • AIRCRAFT QUICK START gUIDE
Press to adjust value
Press to return
value to default