Model Name; To Enter The Model Name Function; Model Match; How Model Match Works - Spektrum DX7 User Manual

Model Name

The Model Name function is used to input and assign the model's name to a specific memory, allowing easy
identification of each model's program. Each model's name is displayed on the main screen when that model is
selected. Up to eight characters that include numbers and letters are available.

To Enter the Model Name Function

Press the DowN and SELECT keys simultaneously, then turn on the transmitter.
Press the INCREASE or DECREASE key until the
Press the SELECT key to move the cursor to the desired character's position.
Press the INCREASE or DECREASE key to select the desired character.

Model Match

The DX7 features patented Model Match
This feature can prevent stripped servo gears, broken linkages and even a crash due to trying to operate/ fly a
model using the wrong memory.

How Model Match Works

Each individual model memory has its own embedded code that is transferred to the receiver during binding.
The receiver actually learns the code for the specific model memory that has been selected during binding and,
when bound, will only operate when that model memory is selected. If a different (non-matching) model memory
is selected, the receiver simply won't connect. This feature prevents trying to operate/ fly a model using the
wrong model memory. The receiver can be re-programmed to operate with any other model memory by simply
re-binding with the transmitter programmed to the desired model memory.
Note: If the receiver is turned on and the matching model memory is not selected the system will
not connect. Either select the matching model memory or rebind the receiver in the current model
memory to resume operation.
SPEKTRUM DX7 • AIRCRAFT PROgRAMMINg gUIDE
Press to enter
MODEL NAME
[MODEL NAME]
MODEL 1
Hold while turning on transmitter
™
INCREASE and DECREASE key
ACRO
DSM <EXTRA 300>
MODEL NAME
technology that prevents operating a model using the wrong memory.
screen appears.