List Modes - Spektrum DX7 User Manual

List Modes

The list mode screens display all the functions onscreen, allowing the access of any function without having to
scroll through each screen. Note that there are two list modes: a System Setup list mode that displays all the
system setup functions and a Function list mode that displays all the system programming functions.
To enter the System Setup List Mode, with the system on and in any System Setup function, press the UP and
SELECT keys simultaneously.
To enter the Function List mode, with the system on and in any function mode screen, press the UP and
SELECT keys simultaneously.
In either List Mode, pressing the UP and DowN keys will move the cursor to the desired function. Then
pressing the DowN and SELECT key simultaneously will access the selected function.

UP and DOWN key
[FUNCTION LIST]
º D/R & EXP
º AUTO D/R
º REV. SW
º SUB TRIM
º TRAV ADJ.
º SWASH MIX
SELECT key
UP and DOWN key
[FUNCTION LIST]
º PI CURV ST2
º REVO. MIX
º GYRO SENS
º PROG.MIX1
º PROG.MIX2
SELECT key
INCREASE and DECREASE key
º THRO HOLD
º TH CURV NOR
º TH CURV ST1
º TH CURV ST2
º PI CURV NOR
◊PI CURV ST1
CLEAR key
INCREASE and DECREASE key
º PROG.MIX3
º TIMER
◊MONITOR
CLEAR key
SPEKTRUM DX7 • HELICOPTER PROgRAMMINg gUIDE