Auto Dual Rate Exp; To Adjust The Auto Dual Rate - Spektrum DX7 User Manual

Auto Dual Rate EXP

The Auto Dual Rate and Expo function allows Expo and Dual Rate values (aileron, elevator and rudder) to be
automatically selected in each flight mode (Normal, ST1, ST2, and Hold.) When an auto dual rate flight mode is
inhibited, the dual rate is defaulted to the correlating switch and dual rate switch positions.

To Adjust the Auto Dual Rate

Press the DowN and SELECT key simultaneously to access the Function Mode.
Press the UP or DowN key until the
Use the select key to select NORMAL,
When selected, press the INCREASE or DECREASE key to select
Note: The actual dual rate values are set in the Dual Rate and Expo screen. See Page 79.
SPEKTRUM DX7 • HELICOPTER PROgRAMMINg gUIDE
Press to enter
AUTO DUAL RATE
[AUTO D/R EXP]
Press to enter
Function Mode
AUTO D/R EXP
ST1 ST2
Press to adjust value
◊NORM INH
ST-1 INH
ST-2 INH
Press to select
desired flight mode
screen appears on screen.
or HOLD FLIgHT
DUAL
Press to return value
to default setting
mode.
RATE, P-1, P-2 or INHIBIT.
1