Type Select Function
The DX7 features two programming types: Airplane and Helicopter. The DX7 can memorize data for up to 20
models individually and the model type will automatically be stored with each model memory.
Press to enter
TYPE SELECT
Hold while turning on transmitter
To Enter the Type Select Mode
Press the DowN and SELECT keys simultaneously, then turn on the transmitter.
Press the UP key until the
To Select a Model Type
Press the INCREASE or DECREASE key to toggle between the heli or acro model types.
To accept the new model type press the CLEAR key. All settings will be set to the factory defaults.
[TYPE SELECT]
MODEL 1
HELI
◊ACRO
TYPE SELECT
function appears on screen.
Press the INCREASE and DECREASE key
[TYPE SELECT]
MODEL 1
HELI
◊ACRO
YES-> CLEAR KEY
Accept new model type
INCREASE and DECREASE key
SPEKTRUM DX7 • AIRCRAFT PROgRAMMINg gUIDE