Type Select Function
The DX7 features two programming types: Airplane and Helicopter. The DX7 can memorize data for up to
20 models individually.
To Enter the Type Select Mode
Press the DowN and SELECT keys simultaneously, then turn on the transmitter.
Press the UP key until the
To Select a Model Type
Press the INCREASE or DECREASE key to toggle between the heli or acro model types.
To accept the new model type press the CLEAR key. All settings will be set to the factory defaults.
SPEKTRUM DX7 • HELICOPTER PROgRAMMINg gUIDE
Press to enter
TYPE SELECT
[TYPE SELECT]
MODEL 1
◊HELI
Hold while turning on transmitter
TYPE SELECT
[TYPE SELECT]
MODEL 1
◊HELI
YES-> CLEAR KEY
INCREASE and DECREASE key
ACRO
function appears on screen.
Press the INCREASE and DECREASE key
ACRO
Press to accept new model type