Flap System; Accessing And Utilizing The Flap System - Spektrum DX7 User Manual

Flap System

The purpose of the Flap System is to set the flap and elevator positions for landing and takeoff. This is
accomplished by selecting values for the elevator and flaps to be activated when the Land Switch is engaged.
Three flap and elevator positions are available. The landing system can also be activated by a preset position
of the throttle stick. Refer to the Automatic Landing Attitude section for more information on how to select the
preset throttle position.
Note: The Flap System is only operational when
Select screen. See page 41 for more detail.

Accessing and Utilizing the Flap System

Press the UP and SELECT keys simultaneously to enter the Function Mode.
Press either the UP or DowN keys until
Press the SELECT key to position the cursor at the desired function (i.e., ELEV, FLAP, SPOI, AUTO).
Note: The flap system can only be accessed when
screen under flaps. See page 41 for more details.
Press the UP or DowN keys to set the value for flap and elevator travel. The UP key adds up flap/elevator and
the DowN key adds down flap/elevator. The input is adjustable from 125% for flap and -200% for elevator.
SPEKTRUM DX7 • AIRCRAFT PROgRAMMINg gUIDE
Press to enter FLAP SYSTEM
[FLAP SYS.]
NORM ◊UP100%
MID
LAND
Press to enter
Function Mode
SYSTEM
FLAP ELEV
0%
DN100%
AUTO INH
Press to highlight
the desired function
FLAP SYS appears in the upper left portion of the LCD.
SYSTEM
is selected under Flap in the Input
Press to adjust value
NORM
0
0
0
Press to return
value to default
is selected in the Input Select