Function List Modes; To Enter The Function List Mode; To Exit The Function List Mode - Spektrum DX7 User Manual

Function List Modes

The list mode screens display all the functions onscreen allowing the access of any function without having to
scroll through each screen. Note that there are two list modes: a System Setup List Mode that displays all the
system setup functions, and a Function List Mode that displays all the system setup functions.
To enter the Function List Mode, with the system on and in any function mode screen, press the UP and
SELECT keys simultaneously.
In list mode, pressing the UP and DowN keys will move the cursor to the desired function. Then pressing the
DowN and SELECT keys simultaneously will access the selected function.
UP and DOWN key
Press to enter function List Mode

To Enter the Function List Mode

• Turn the transmitter on.
• From the main screen, press the UP and SELECT keys simultaneously.
• The system is now in Function List Mode and will display a list of all the functions available.
• Use the UP and DowN keys to Scroll through the available function.
• Press DowN and SELECT to enter a selected function.

To Exit the Function List Mode

• Press the DowN and SELECT keys simultaneously twice. The system will return to the main screen
or turn off the transmitter.

INCREASE and DECREASE key
[FUNCTION LIST]
º EL≥FL MIX º PROG.MIX3
º TRAV ADJ. º PROG.MIX2
º SUB TRIM º PROG.MIX1
º REV. SW
º EXPONENT. º FLAP SYS.
◊DUAL RATE º AI≥RU MIX
SPEKTRUM DX7 • AIRCRAFT PROgRAMMINg gUIDE