Under-the-Faceplate Features
f
g
Figure 5.
e
Link 1 and Link 2 LED indicators — Light when there is light present on the
corresponding fiber optic port.
f
Reset button — Press the Reset button to return device settings or firmware to the
factory default settings (see
g
Config port — Connect a host device, such as a PC, to the mini-USB type B config
port for RS-232 protocol control of all FOX T UWP 302 functions. Configure the
FOX T UWP 302 with SIS commands (see
or the FOX Extenders control program (see
page 21).
e
AUDIO INPUT
COMPUTER INPUT
POWER
PC
HDMI
HDCP
RESET
AUDIO
CONFIG
FOX T UWP 302 Under-the-Faceplate Features
System Reset
FOX T UWP 302 Wallplate Transmitter • Installation and Operation
HDMI INPUT
on page 12).
Simple Instruction Set Control
FOX Extenders Control Program
on page 13)
on
7