Extron electronics FOX T UWP 302 User Manual page 40

Plus Mode Transmission panel
Plus mode can support rates up to 1920x1200 @ 60Hz, with embedded audio, and is
HDCP compliant. Non-Plus mode supports rates up to 1600x1200 and 1080p, is HDCP
compliant, and does not contain embedded audio (analog audio is still supported).
In the Plus Mode Transmission panel, click the
To disable Plus mode, click the
NOTE: Default setting: Plus Mode is
VGA Input Video Format panel
This setting selects RGB or YUV Input Video Format for the VGA input.
NOTE: Default setting: VGA Input Video Format is
Audio Input Selection panel
This panel sets the audio type for the VGA and HDMI inputs, or set them to
automatic selection.
For each input, select the desired audio input type from the
Figure 28. Audio Input 1 Options
NOTE: Default setting: Audio Input Selection is
Advanced Tab
Figure 29. Advanced Tab
FOX T UWP 302 Wallplate Transmitter • FOX Extenders Control Program
radio button to enable Plus mode.
Enabled
radio button.
Disabled
.
Enabled
.
Auto
for all inputs.
Auto
for
Auto
drop-down list.
Input
34